Shenzhen TYPMAR Wind Energy Technology Co.,Ltd
15 Years ! Integrated Intelligence,Dynamic Future
TYPMAR Wind tunnel tests are also performed to measuring the air movement of our maglev wind turbines at a specific pressure exactly. By determining the environmental circumstances during the measuring and by revising the air-tightness afterwards, the standardization of the data is warranted. There are two possible ways of measurement: a complete turbine (CXF200W &CXF300W &CXF600W &CXF1KW ) or only wind core installation (Savonius wind turbine of CXF3KW) . Two measuring tubes enable measurements of lower air currents (< 30.000 m³/h) as well as higher air currents (< 60.000 m³/h). The determination of the Q/h curve of TYPMAR maglev wind turbine is one of the main objectives.
To determine this curve (and to define other parameters) air technical, mechanical as well as electro technical data are measured:
Air technical:
Electro technical:
The measurement can take place on the turbine or in the application in which the equipment is used.
Standard:IEC 61400-22-1999_Wind turbine certification Number:Test Report No. : 141200288SHA-001 Issue Date:2014-12-25 Scope/Range:wind energy Issued By:Intertek (Guangzhou China ) |