Model | CXF600w-24V off-grid | CXF600W-48V off-grid |
Battery parameters |
Applied battery voltage | 24V |
Battery protect method | Reverse connection protection (do not burn any components, with voice prompt); over voltage protection, under voltage protection (for street light and such kind of load) |
Voltage at the over voltage protection point | 29.0V±0.2V | 58.0V±0.3V |
Voltage at the over voltage recovery point | 27.5V±0.2V | 55.0V±0.3V |
Voltage at the under voltage protection point | 21.0V±0.2V | 42.0V±0.3V |
Voltage at the under voltage recovery point | 23.0V±0.2V | 46.0V±0.3V |
Battery temperature compensation | 5mv/℃/2V (settable) (optional component) |
Wind turbines input parameters |
Rated power of applied Wind turbines | 600W/24V | 600W/48V |
Rated power of the terminal | 30A dc (after rectification) | 15A dc (after rectification) |
Max. input current of the terminal | 40A dc (after rectification) | 20A dc (after rectification) |
The default speed of the Wind turbines generation with limited speed | 500 Rpm (settable) |
The default current of the Wind turbines generation with limited current | 30A (settable) | 15A (settable) |
Wind turbines protection method | over rev protection, over current protection, induction lightening protection |
Unloading method | PWM stepless high-frequency soft unloading (built-in) |
MPPT function | Boost MPPT model ( automatic tracking or 5 segments curve tracking) |
Input current of MPPT channel | 12A |
PV input parameters |
Rated input current of applied PV | 550W/24V(standard)
1100W/24V(ptional) | 1100W/48V(standard)
2000W/48V(ptional) |
Rated input current of terminal | 15A(standard)
30A(optional) |
Charging voltage drop | <0.2V |
PV protection methods | Reverse connection protection (voice prompt) |
Unloading method | Open circuit unloading |
Discharge the output port parameters |
output | 2 outputs |
Current of each output | 12A |
Output protection methods | Over current protection (15A/30sec. 18A/0.4sec.), short-circuit protection (current > 150A) |
Output control methods | light control, time control, reverse output, PWM output (250HZ, only the 2nd output has it) |
Others |
Auxiliary function | Monitor of air temperature inside controller, temperature of unloading parts and Wind turbines MPPT components, and also the monitor of control terminals installed on the inversion (with voice prompt) |
Display mode | Liquid crystal (LCD) display |
Communication mode | RS232(5V electrical level)/RS485 (standard)
Short-range wireless (optional) |
Displayed parameters | Wind turbines input voltage/current/power/generated energy/rev/unloading current
PV input voltage/current/power/generated energy
Battery voltage/charging current/power/total charging capacity/battery status information
output current/power/abnormal information of the 2nd output port |
Power consumption in standby mode(screen backlight closed) | About 20ma /24V system |
Operating mode | 3M foil key operation (4 keys) |
Working temperature / humidity range (environment) | -40~+80℃/20~85%RH(non condensing) |
Protection grade | IP41 |
Controller size (L*W*H) | 175mm*148mm *84mm |
Net weight | 1.8KG |
| | | | | |
