High Efficiency Maglev Wind Power Generator for 30W Camera System
Quick Details
- Startup at low wind speed of 1m/s
- Higher efficiency compared to traditional HAWT
- Works even in turbulence
- Visually pleasing appearance
- Turbine construction is resistant to gale 60m/s (132MPH)
- Robustness and adaptation to all possible environmental conditions thanks to material of aluminum alloy or stainless steel
- Life span: at least 20 years
- 300W Maglev Wind Generator for 30W Camera System works 24 hours
Description
The CXF series of maglev wind generator undergoes a continuous improvement process, which incorporates exterior design, utility design, electrical engineering, dynamic engineering, power mechanics, aviation air engineering, wind tunnel testing, lightening protection, computer simulation techniques and other multiple specialities.
TYPMAR maglev wind generator have 6 models, 200W, 300W, 400W and 600W, 1KW, 3KW are for camera system ,hybrid street lighting, remote site monitoring, home use, telecom station or any place need independent power.
For the monitoring system power supplying renewable energy, we have a project in North China, Liaoning Province. The installation place is a historic reservation site. Total 40 towers installed.
Generally the configuration as below:
Maglev wind generator : 300W, 24V 3 sets
Solar Panel : 150W,24V 6 pcs
Camera : 35W,24V 4 pcs
Tower : 12m
Gel Batteries : 200AH, 8 pcs
Specification:
|
Maglev wind generator
|
| Type |
CXF200 |
CXF300 |
CXF600 |
CXF1000 |
CXF3000 |
| Rated Power |
200W |
300W |
600W |
1000W |
3000W |
| Size(Height / Diameter) |
1035/1150mm |
1090/1240mm |
1320/1540mm |
2200/2400mm |
3370/3700mm |
| Turbine Weight |
22.5KG |
31KG |
49KG |
180KG |
415KG |
| Blades Material |
Aluminum alloy |
Aluminum alloy |
aluminum alloy |
aluminum alloy |
aluminum alloy |
| Blades Qty. |
3 |
3 |
3 |
3 |
3 |
|
Start-up
wind speed
|
1m/s |
1.3m/s |
1.3m/s |
1.5m/s |
1.5m/s |
|
Cut in
wind speed
|
2m/s |
3m/s |
3m/s |
5m/s, 3.5m/s |
3.5m/s |
| Rated Wind Speed |
13m/s |
12m/s |
13m/s |
13m/s |
13m/s |
| Cut out Wind Speed |
16m/s |
15m/s |
15m/s |
15m/s |
15m/s |
| Survival Wind Speed |
60m/s |
65m/s |
65m/s |
60m/s |
60m/s |
| Generator Type |
AC,3 phases |
AC,3 phases |
AC,3 phases |
AC,3 phases |
AC,3 phases |
| Controller output voltage |
DC12V |
DC24V/12V |
DC24V/12V/48V |
DC48V/24V |
DC48/96V |
| Controller output current |
<12Amp |
<20Amp |
<30Amp |
<50Amp |
<130Amp |
| Controller braking system |
3-Phase /short circuit protection/ NFB/
Manual break or automatic brake optional
|
| Ambient Temperature |
-30～50 ℃ |
-40～50 ℃ |
-40～50 ℃ |
-40～50 ℃ |
-40～50 ℃
|
Advantages
| Rated power |
Approx. 300Wh at 13 m/s (26 mph) |
| Swept Area |
0.8 m2 |
| Height / Diameter |
1.23/1.09 m |
| Weight |
27 kg |
| Shipping Dimensions |
1160 x 520 x 790 mm 56 kg |
| Startup Wind Speed |
1 m/s (2.6 mph) |
| Voltage |
12, and 24 V AC |
| Turbine Controller |
Smart Wind $ solar hybrid controller |
| Body |
Permanent mold cast aluminum |
| Blades |
(7) Injection-molded aluminum |
| Alternator |
Permanent maglev generator |
| Overspeed Protection |
3 phases short-circuit braking control |
| Survival Wind Speed |
65m/s |
| Mount |
Inner diameter 80MM 140mm outer diameter |
| Wind Speed Operating Range |
1-15 m/s (8-49 mph) |
| Optimum Wind Speed Range (RPM) |
8-10 m/s ( 750-800RPM) |
